Condensation control

When the temperature and humidity conditions reach the dew point, moisture condenses on the underside of the uninsulated metal roof. If there is a lot of condensation, drops of water form and start to fall causing damage to the contents below.

The traditional method for dealing with condensation is to try and insulate the roof so that the temperature on the panel never reaches the dew point

DR!PSTOP solutions

DR!PSTOP  anticondensation felt is self adhesive, and is applied to the metal panel in the roll forming process. As a result, DRIP STOP arrives at the building site already in place and set to be installed with the roofing panels immediately. The membrane is resistant to aging, and also provides an additional layer of protection for your metal roof.

DR!PSTOP is a brand you can trust. Years of experience has helped us to develop such an excellent product.

DR!PSTOP can be used in virtually any environment (structure) where condensation is a problem.

Advantages of DR!PSTOP

For end users

  • Money saving up to 25% compared to traditional solutions
  • Durability (DR!PSTOP anti-condensation felt is not susceptible to ripping, tearing or deterioration like standard insulation and vapor barriers are)
  • Easy to clean (with hose or pressure washers)

For constructioners

  • Time saving (no need to roll a vapor barrier over the purlins and seal and to roll out insulation on top of that)
  • Easy handling (no problems with windy conditions)

Technical performances

  • Combustibility A2-s1, d0 (EN 13501-1)
  • Bacterial resistance
  • Improves acoustical insulation

Global Supplier

Hundreds of millions of square feet of DR!PSTOP condensation protection are in place worldwide. DR!PSTOP has been in every climate condition from Scandinavia/Siberia down to the Greek Isles and South America.